Thin lineCutter-001 click Fea­tures:

  • Low-Cost High-Speed Cut­ting: 6 Cuts per sec­ond in auto­mat­ic mode
  • Pre­ci­sion Accu­ra­cy (Res­o­lu­tion): Y and Z: ± 0.0002″ (± 0.005 mm)
  • Theta Axis: ± 0 .001 degrees
  • 5 Axis Pro­gram­ma­ble Con­trol: Y, Z, theta, left, and right cam­era
  • 3 Oper­at­ing Modes: man­u­al, auto­mat­ic, and auto vision align­ment
  • Win­dows-based pro­pri­etary oper­at­ing sys­tem UI

Flex­i­bil­i­ty com­bined with Pre­ci­sion  Accu­ra­cy

Pacif­ic Tri­net­ics Corporation’s cut­ting sys­tem pro­vides many improve­ments for dic­ing tech­nol­o­gy.

The CT Series Cut­ting Sys­tem is specif­i­cal­ly designed for high-speed, pre­ci­sion cut­ting of mul­ti­lay­er ceram­ic capac­i­tors (MLCC), chip induc­tors and LTCC/HTCC pack­ages and mod­ules.

The CT Series is engi­neered and built to meet the demand­ing require­ments for cut­ting today’s minia­ture chip com­po­nents. This guil­lo­tine-style blade cut­ting sys­tem, with its heat­ed stage and blade, will accept a ceram­ic bar size of up to 12″ (304 mm) square and make high-qual­i­ty cuts in mate­r­i­al as thick as 0.390″ (10.0 mm). It uses Win­dows Oper­at­ing Sys­tem to con­trol the entire machine.

For more infor­ma­tion, please down­load the spec­i­fi­ca­tion sheet for this prod­uct here.